The digital display
The digital display indicates:
•The level of hardness to which the water softener is set,
•The approximate remaining time of the running programme,
•Activation/deactivation of the rinse aid dispenser (ONLY with Multi tab function active),
•The end of a washing programme (the digital display shows zero),
•The countdown of the delay start,
•Fault codes concerning malfunction of the dishwasher,
•Activation/deactivation of the audible signals.
Function buttons (A, B, C, D and E)
The following functions can be set using these buttons:
•Setting the water softener level,
•Cancelling a washing programme or a delay start in progress,
•Activation/deactivation of the Multi tab function,
•Activation/deactivation of the rinse aid dispenser when Multi tab function is active,
•Activation/deactivation of the audible signals.
Setting mode
Press the On/Off button; if ALL programme button lights come on the appliance is in setting mode.
Always remember that when performing the following operations:
•Selecting a washing programme,
•Setting the water softener,
•Activating/deactivating the rinse aid dispenser,
•Activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button; if a programme button light comes on the last performed or selected programme is still set.
In this case, to return to setting mode, the programme has to be cancelled.
To cancel a set programme or a programme in progress Simultaneously press and hold the two function buttons B and C until all the programme button lights come on.
The programme has been cancelled and the appliance is now in setting mode.
Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing:
–Setting of the water softener,
–End of programme
–Intervention of an alarm due to
malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the function buttons on the control panel.
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Simultaneously press and hold function buttons B and C, until the lights of function buttons A, B and C start flashing.
8
