John Lewis JLDWS 907 instruction manual Washing programmes

Washing programmes

Before starting a washing programme make sure that:

-The water supply tap is open.

-The correct amount of detergent has been added to the dispenser.

-The baskets have been correctly loaded.

-The spray arms are able to rotate freely and without obstruction.

-The dishwasher door is securely closed.

"Multi tab" option button (available in all programmes except the soak programme)

By pressing the button (6) you activate the "Multi tab" option, confirmed when the relative light comes on. This option has been studied for the use of dishwashing powder or tablets with integrated substances in place of regenerating salt or rinse-aid known on the market as "3 in 1" or "triple action" products; in this case the dishwasher will use the product in an optimal way avoiding salt and rinse-aid consumption, which could already be found in the dishwasher.

When selecting the "Multi tab" button, it is normal that the salt and rinse-aid lights remain on, if their containers are empty.

Delaying the programme (available in all programmes except the soak programme)

The PROGRAMME DELAY button (8) can be pressed to delay the start ofthe programme by up to 9 hours. This means that the dishwasher can beoperated at the time of day of your choice. Press the button

severaltimes in succession and the display will show the delay with which theappliance will start, beginning from 9 hours.

Cancelling the current programme

•To cancel the currently selected programme, open the door and hold down the PROGRAMME SELECTION (3) button for a few seconds until the indicator lights for programmes 4 and 5 illuminate simultaneously (the word "end" is displayed on the window).

			-end-
Rinse	Quick	Economy	Auto Intensive
hold	wash	50°	70°

•Close the door.

•After approximately 1 minute the dishwasher will advance to the end of cycle.

9