John Lewis JLDWS 907 Technical data, Installation, Unpacking, Fitting under a counter

Models: JLDWS 907

1 32
Download 32 pages 24.86 Kb
Page 26
Image 26
Technical data

Technical data

Width

447 ÷ 449 mm

Depth measured flush with the

593 mm

outer edge of the control panel

 

 

 

Height

from 820 mm to 890 mm

 

 

Capacity

10 Standard place settings

 

 

Water supply pressure

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

 

 

Electrical characteristics

See rating plate

 

 

Installation

Warning! It is dangerous to alter the specifications or attempt to modify this product in any way. This appliance is heavy. Care should be taken when moving it. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance must be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance must be carried out by a qualified plumber or competent person.

Unpacking

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(Kitchen worktop or sink)

To build in the dishwasher, the special kit must be purchased from authorised dealers or the After-Sales Service.

By removing the machine’s worktop, you can install it under a close fitting sink unit or a preexisting top, providing the dimensions of the recess correspond to those shown in the picture.

26

Page 26
Image 26
John Lewis JLDWS 907 instruction manual Technical data, Installation, Unpacking, Fitting under a counter