Baldor EXB009A01, Resolver to Digital Expansion Board Section Installation, Board Installation

Section 3

Installation

Board Installation

This section describes the Expansion Board installation procedure.

Caution:	Before you proceed, be sure to read and
	become familiar with the safety precautions
	at the beginning of this manual. Do not
	proceed if you are unsure of the safety
	precautions described. If you have any
	questions, contact BALDOR before you
	proceed.

1.Remove the expansion board from the shipping container.

2.Remove all packing material from the board.

Caution:	Be sure all packing materials are removed
	from the board. Conductive foam may be
	present on the connectors to prevent static
	build up during shipping. This can prevent
	proper circuit operation.

Installation differs between the 1-15 HP Size A and B controls and the 15HP Size C and larger AC controls and the SCR DC controls. If you are installing only one board, refer to the ªSingle Expansion Board Installationº procedure. If you are installing two expansion boards (or a second board) refer to the ªDual Expansion Board Installationº procedure.

Installation 3-1