Baldor EXB009A01 manual Dual Expansion Board Installation Continued, 1-15HP Size A and B Controls

1-15HP Size A and B Controls

Dual Expansion Board Installation (Continued)

13.The mechanical installation of the first expansion board is now complete. Refer to the manual for the Group 2 board and configure any jumpers and switches as desired. Also complete the wiring for this board before you install the cover.

14.When complete, install the control cover using the four (4) Phillips head screws.

15.Restore all power sources to the control.

16.Restore drive operation.

Figure 3-3 Dual Expansion Board Installation

#6 Screw
	Group 2 Expansion Board
Short	Female Connector
Aluminum
Standoff	Male Connector
	Group 1 Expansion Board
Long	Female/Female shown. Use Male/Female
Aluminum or
	in place of (MH1) screw (Figure 3-1).
Nylon Standoff
	Main Circuit Board

Installation 3-5