Installing the Remote Printer Console

Before you install the program, make sure you have the following hardware and software required to install the program:

DOS

Version 3.3 or later

 

(You must be runnning under a pure DOS

 

environment. The Remote Printer Console will not

 

work in DOS emulation mode.)

Monitor

EGA/VGA or compatible

Option

Mouse; the mouse driver must be installed.

 

(You can also operate the program with the keyboard.)

Follow these steps to install the Remote Printer Console program:

1Make sure your Brother machine is connected to your computer and that it is Online.

2Start your computer and go to the DOS prompt. If you are in Windows® , exit and return to the DOS prompt.

3Insert the Brother CD-ROM into your CD-ROM drive.

4At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM drive for “x”) and press Enter.

C:\>x:

5Type CD RPCX and press Enter. x:\>CD RPCX

6Type RPCSETUP and press Enter. x:\RPCX>RPCSETUP

7Follow the instructions of the installer.

F O R D O S U S E R S

12 - 2

Page 109
Image 109
Brother MFC 4300 owner manual Installing the Remote Printer Console, Dos