Brother MFC 4300 owner manual Not Registered, Mfc

ERROR MESSAGE	CAUSE		ACTION
NOT REGISTERED	You tried to access a One	Set up the One Touch or
	Touch or Speed Dial	Speed Dial number.
	number that is not	See pages 7-1to 7-2.
	programmed.
PLS OPEN COVER	A page, piece of paper or	Open the top cover. If you
	paper clip, etc. may be	see any jammed paper or
	jammed inside the	other item, gently pull it
	MFC.	out, then close the scanner
		unit. If the error message
		remains, open and close
		the top cover again. If the
		MFC cannot reset itself
		and return to the date and
		time prompt, it will
		display MACHINE
		ERROR XX. Please call
		Brother Customer Service
		and tell them the Machine
		Error number, at:
		In USA:
			1-800-284-4329
		In Canada:
			1-800-853-6660
		In Montreal:
			1-514-685-6464
PRINT OVERRUN	The available Ram has	Unplug the MFC and plug
(May occur when the	been exceeded.	it back in. Data remaining
MFC is used as a		in the memory of the MFC
printer.)		will be deleted.
		•	If you have installed
			the Windows® printer
			driver, try again after
			setting the TrueType
			mode to “Print as
			Graphics” in the
			PRINT menu of your
			application software.
		•	If this does not clear
			the error, reduce the
			complexity of your
			document or reduce
			the print resolution.
PRINTER JAM	The paper is jammed in	Do not pull the paper out
	the MFC.	until you see pages 15-6
		to 15-7.

15 - 4 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E