Advanced Sending Operations
Contrast
If your original is very light or very dark, you might want to set the contrast accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very dark original.

1Place the original face down in the ADF.

2Press Function, 1, 3, 3.

3Pressorto select AUTO, S.LIGHT or S.DARK, and then press Set.

4Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu OR Press 2 if you are finished choosing settings, and then go to Step 5.

5Enter a fax number and press Start to send a fax.

Resolution

When you have an original in the ADF, you can use the Resolution key to change the default setting. Press Resolution continuously until you see the lights change to the setting you want. For Standard, turn Fine and S. Fine lights off. For Photo, turn them both on. (See Multiple Resolution Transmission, page 6-9.)

Standard—Good for most typed documents.

Fine—Good for small print; transmits a little slower than standard resolution.

S.Fine (Super Fine)—Good for small print or artwork; transmits slower than fine resolution.

Photo—Use for documents with varying shades of gray; slowest transmission time.

 

Overseas Mode

 

 

After you send a fax using this feature, the feature turns itself off.

1

Place the original face down in the ADF.

 

2

Press Function, 1, 3, 5.

5.OVERSEAS MODE

3

 

Press or to select ON (or OFF), and

 

 

then press Set.

 

4

Press 1 if you want to select additional settings. The LCD returns to the SETUP

 

SEND menu—OR—Press 2 if you are finished choosing settings, and then go

 

to Step 5.

 

5

Enter the fax number you’re calling.

 

6

Press Start.

 

6 - 7

S E T U P S E N D

 

Page 66
Image 66
Brother MFC 4300 owner manual Resolution, Overseas Mode