Brother MFC 4300 owner manual Printer Configuration, Other Configuration, Printer Setup Category

Printer Configuration

Item	Default	What This Item Does
Continue Mode	Manual	Selects Auto or Manual on Auto error
		recovery mode.
Parallel	Enable	Selects the bi-directional parallel “Enable”
Bi-directional		or “Disable.”
Other Configuration
Item	Default	What This Item Does
Auto LF	Off	Selects Auto LF “On or Off”
Auto CR	Off	Selects Auto CR “On or Off”
Auto Wrap	Off	Selects Auto Wrap “On or Off”
Auto Skip	On	Selects Auto Skip “On or Off”
Printer Setup Category
File		Function
Send settings		Sends the settings made within the RPC to
		your MFC.
Load settings		Loads the settings you stored in your
		CD-ROM or hard disk to the RPC.
Save settings		Saves the RPC settings to your CD-ROM or
		hard disk.
Save a command		Saves the RPC settings to your CD-ROM or
		hard disk as a printer command string.
Load Default		Loads the default settings to RPC.
Quit		Exits.
Direct Access Category
Item	Function
Print Form	Prints the MFC’s character/symbol sets
	“CHARASET.PRN” or any print files you have made.
Reset Printer	Resets the MFC. The data remaining in the MFC and
	the printer settings will be cleared.

F O R D O S U S E R S 12 - 6