Brother MFC 4300 Setting Up Polled Transmit, Polled TXOFF? Select, DOC 2.MEMORY, Insert Original

If you pressed 1 in Step 4, the printed original remains in the ADF until your MFC is polled. However, you can “interrupt” it to send another fax.

Interrupting Delayed Fax and Polled Transmit Jobs

You can send a fax or make a copy now, even if you have the MFC set to send a fax later or to be polled. However, you cannot use automatic redial or the Function mode.

Setting Up Polled Transmit

Polled Transmit is when you set up your MFC to wait with an original so another fax machine can retrieve it. (See Interrupting Delayed Fax and Polled Transmit Jobs, page 6-10.)

1Place the original to be retrieved face down in the ADF.

2 Press Function, 1, 3, 8.	POLLED	TX:OFF?
	SELECT	<- -> & SET

3Press or to choose POLLED TX:ON?,

and then press Set. 1.DOC 2.MEMORY

4Press 1 to select DOC if you want your MFC to scan the printed original at the time it is polled—OR—Press 2 to select MEMORY.

5Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu—OR—Press 2 if you are finished choosing settings, and then go to Step 6.

6Press Start.

1Press Function, 1, 5.

2 Wait 2 seconds, and then remove the	INSERT ORIGINAL
original that is waiting in the ADF.

3Place the “new” original you want to send or make a copy now in the ADF.

4Enter the new fax number for the original you want to send now.

5Press Start.

6After the transmission is finished, place the “old” original back into the ADF.

7Press Function, 1, 5, to restore the Delayed Fax or Polling job.

S E T U P S E N D 6 - 10