Brother MFC 4300 owner manual Using the Remote Printer Console Main Program, Pcl

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX, and then press the Enter key to start the Remote Printer Console main program.

The Main Screen will appear on your computer screen as shown below.

Remote Printer Console

Direct_Access Printer_Setup Console_Config Guide

Current Status

Status		Ready
Paper feed		Sheet Feeder
		￿
Emulation		PCL
Paper Size		Letter
Orientation		Portrait
Quality		Normal
Copies	1
Memory size		524288 Byte
[−/¬] Select		[Enter] Setting

[Alt+Character] Menu [F1] Help [ESC] Exit

If bi-directional communication is enabled between your computer and MFC when it starts, the RPC gets the current settings information from your MFC. Otherwise, RPC shows its default settings. If you want to change settings, move the cursor to the item you want, and then select it using the Enter and Cursor keys. Finally, press the Enter key to make the selected settings valid.

There are four sub menus. (See table below.) Select the sub menu you want by clicking it with the mouse, using the cursor keys and the Enter key, or by pressing the hot key commands for that sub menu.

Menu	Press the keys	Functions
Direct	Alt + D	You can directly control the Brother
Access		machine, with Print Form, Reset Printer.
Printer	Alt + P	You can enter the setting mode to change other
Setup		printer settings, such as, margin settings, continue
		mode, font and sleep mode.
Console	Alt + C	You can change the environment settings for the
Config		RPC program: color, Status Monitor
		configuration, etc.
Guide	Alt + G	You can go to the Guide mode.
Help	F1	You can get Online Help: If you press F1, you
		can get information about a highlighted item.

12 - 3 F O R D O S U S E R S