Brother MFC 4300 owner manual Setup Section, Font Configuration

Page Setup Section

Item	Default	What This Item Does
Paper size*1	Letter	Selects the paper size, either “A4”, “Letter”,
		“Legal”, “B5”, “DL”, “Executive”,
		“COM10”,“Monarch” or “C5.”
Orientation*1	Portrait	Selects the paper direction to either “Portrait”
		and “Landscape.”
Left Margin	*2	Sets the Left Margin value (0-126) columns.
Right Margin	*2	Sets the Right Margin value (10-136)
		columns.
Top Margin	0.5" or 0.33"	Sets the Top Margin 0", 0.33", 0.5", 1", 1.5"
		or 2".
Bottom Margin	0.5" or 0.33"	Sets the Bottom Margin 0", 0.33", 0.5", 1",
		1.5" or 2".
Line / Page	*2	Sets the lines/pages (5-128).
Xoffset	0	Sets the Xoffset (vertical) value from -500 to
		500 dots.
Yoffset	0	Sets the Yoffset (horizontal) value from
		-500 to 500 dots.

*1 These values (except Yoffset and Xoffset) are overidden by settings within your application software.

*2 These values depend on the paper size settings.

Font Configuration

Item	Default	What This Item Does
Font Source	Internal	Fonts are stored internally in the MFC.
Font name	Brogham10	Selects a font from any of the printer’s
		internal fonts.
Pitch	10	Selects the font size of the selected font.
		If you selected the Brougham or
		LetterGothic font, Pitch is shown in the
		selection box.
Symbol Set	Roman-8	Selects the symbol set.

12 - 5 F O R D O S U S E R S