Brother MFC 4300 owner manual Alternating Displays, Function Selection Table, Fax Functions

Alternating Displays

When you see alternating displays, the LCD sometimes alternates between the currently selected option, and a help message giving brief instructions about how to proceed. The display you’ll probably see most often is shown below, showing you, when you place an original in the ADF, that you can dial a number and send a fax, or you can make a copy.

FAX: NO. & START￿

￿

COPY: PRESS COPY

Function Selection Table

If you have a basic understanding of how to program your MFC, you can perform most of the programming settings without the Owner’s Manual. To help you understand the function selections, options, and settings that are found in your fax programs, use the Function Selection Table below.

1. Fax Functions

1. INITIAL SETUP

Function	Description	Factory Set	Page
1. DATE/TIME	Enter date and time for LCD	—	4-1
	display and heading on
	transmissions.
2. STATION ID	Program name, fax number	—	4-1
	and elephone number to
	appear on each transmitted
	page.
3. BEEPER	Adjust volume level of	LOW	4-4
	beeper.
4. SLEEP MODE	Conserves power	00 MIN	4-6
5. DELAYED TIMER	Sets the time of day that	—	4-6
	delayed faxes will be sent.
6. VOLUME AMPLIFY	For the hearing-impaired,	OFF	4-5
	you can set the volume to the
	AMPLIFY: ON setting on a
	permanent or temporary
	basis.
7. TONE/PULSE	Selects dialing mode.	TONE	4-2
(Canada Only)
8. LOCAL	Allows you to change the	ENGLISH	See French
LANGUAGE	LCD Language to French		Owner’s
(Canada Only)			Manual

O N - S C R E E N P R O G R A M M I N G 3 - 2