Brother MFC 4300 4Initial Setup, Getting Started, Setting Date and Time, Setting Station ID

4 4Initial Setup

Getting Started

After you have assembled your machine uing the Brother StartCard, continue the setup by programming the rest of the initial settings.

Setting Date and Time

Your MFC displays the date and time, and prints it on every fax you send.

In the event of a power failure, you may have to reset the date and time. All other settings remain unaffected.

1	Press Function, 1, 1, 1.	ENTER	YEAR:XX
2
	Enter the last two digits of the year, and then	ENTER	MONTH:XX
	press Set.
3	Enter two digits for the month and press Set	ENTER	DAY:XX
	(for example, enter 09 for September).
4	Enter two digits for the day (for example, 06),	ENTER	TIME:XX:XX

and then press Set.

5Enter the time in 24-hour format, and then press Set (for example, enter 15:25 for 3:25 PM).

6Press Stop.

The LCD now will show the date and time you set whenever the MFC is in Standby mode.

Setting Station ID

You can store your name, fax number, and telephone number to be printed on all fax pages you send. (See Composing Electronic Cover Page, page 6-4and Entering Text, page 4-2.)

1Press Function, 1, 1, 2.

2Enter your fax number (up to 20 digits), and then press Set.

(You must enter a fax number to proceed.)

FAX:

TEL:

3 Enter your telephone number (up to 20 digits),	NAME:
and then press Set.
(This number appears on Cover pages.)

If your telephone number and fax number are the same, enter the same number again. The LCD shows your entry.

4 - 1 I N I T I A L S E T U P