John Lewis JLFFIN175 Replacing the lamp, Closing the door, Caution! Disconnect the appliance

Problem	Possible cause	Solution
The temperature in the	The Temperature regulator may	Set a higher temperature.
appliance is too low.	be set incorrectly.
The temperature in the	The Temperature regulator may	Set a lower temperature.
appliance is too high.	be set incorrectly.
	The door is not closed correctly.	Refer to "Closing the door".
	The product temperature is too	Let the product temperature
	high.	decrease to room temperature
		before storage.
	Many products are stored at the	Store less products at the same
	same time.	time.
The temperature in the	There is no cold air circulation in	Make sure that there is cold air
refrigeration is too high.	the appliance.	circulation in the appliance.
The temperature in the	Products are too near to each	Store products so that there is
freezer is too high.	other.	cold air circulation.
The appliance does not	The appliance is switched off.	Switch on the appliance.
operate.
	The mains plug is not connected	Connect the mains plug to the
	to the mains socket correctly.	mains socket correctly.
	The appliance has no power.	Connect a different electrical
	There is no voltage in the mains	appliance to the mains socket.
	socket.	Contact a qualified electrician.
The lamp does not	The lamp is in stand-by.	Close and open the door.
work.
	The lamp is defective.	Refer to "Replacing the lamp".

If your appliance is still not working properly after making the above checks, contact the After Sales Centre.

Replacing the lamp

Caution! Disconnect the appliance.

1.Push the movable part to unhook the lamp cover (1).

2.Remove the lamp cover (2).

3.Replace the lamp with one of the same power and specifically designed for domestic appliances only.

4.Install the lamp cover.

5.Connect the appliance.

6.Open the door. Make sure that the lamp comes on.

1 2

Closing the door

1. Clean the door gaskets.

14