The elements of the temperature display are as follows:
1.Ambient symbol
Seen when the digits show the ambient temperature.
2. Refrigerator symbol
Dark, when the digits show the refrigerator temperature.
3. Freezer symbol
Dark, when the digits show the freezer temperature.
4. Digits
By default the digits show the ambient temperature and the ambient symbol is seen.
The digits can show also:
The medium temperature inside the refrigerator after pressing the "C" button (refrigerator symbol is dark), for a while.
The highest temperature inside the freezer after pressing the "C" button twice (freezer symbol is dark), for a while.
Refrigerator temperature set (value is blinking) when the "F" knob is rotated and for a while afterwards.
Freezer temperature set (value is blinking) when the "B" knob is rotated and for a while afterwards.
5. Super cooling symbol
Visible, when the appliance runs in super cooling mode. See also the chapteron freezing.
6. High temperature symbol
Visible, when the temperature in the refrigerator is too high. See also the description on the display background colour.
7. Shopping symbol
Visible, when the appliance runs in shopping cooling mode. See also the chapter on using the refrigerator.
Display background colour
By default the display background is blue.
When ever a control button or knob is used the background turns bright blue and remains so for a while.
The display background turns red, if the temperature inside the freezer is too warm (alarm). If this is the case, the digits blink the warmest temperature inside the freezer, the high temperature symbol flashes and an acoustic alarm signal is shown.
The temperature might be too warm in the following cases:
Immediately after switching on
The freezer door was left open for a longer time
There is an operating trouble in the freezer
To switch the alarm sound off press the "E" button. The display returns to showing the ambient temperature, however the background remains red until the freezer cools down properly.
Should you press no button during alarm, press the "E" button when the sound finishes to see the warmest temperature reached during the alarm.
Controlling the temperature, setting
The Thermostat will stop and start the cooling system as frequently as is required to maintain the temperatures set within the two compartments.
Temperature of the refrigerator and freezer can be set by knobs "F" and "B", respectively.The set temperature is seen blinking on the display.
For everyday use the setting in the refrigerator should be +5°C; in the freezer the setting would be
Allow the appliance to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the appliance.
The temperature within the refrigerator is influenced by varying factors, the thermostat setting, the ambient room temperature, the frequency that the door is opened and closed and the quantity of food stored within.
When the coldest temperature possible is set - when there are eases of increased demand e.g. during heatwaves - the compressor may operate continually. This does not cause damages to the
appliance.
11
