John Lewis JLTDC11 instruction manual Intensive, Anti-crease, Alarm, Time

To deselect the function press the Extra delicate button again. LED above is off.

Intensive

If the laundry is still damp after a standard drying programme, you can increase the drying result by using the Intensive function.

1. Choose the drying programme.

2.Press the Intensive button - the LED above is on.

To deselect the function press the Intensive button again. The LED above is off.

Anti-crease

This function prolongs the anti-crease phase to 90 mins in total. The drum rotates in intervals during this phase. The laundry therefore remains relaxed and free of creases. To activate it:

1.Choose the drying programme.

2.Press the Anti-creasebutton - the LED above is on.

If this additional function is selected, the anti- crease phase at the end of the drying cycle is lengthened by 60 minutes. The laundry can be

removed at any time during the anti-crease phase.

To deselect the function press the Anti- crease button again. The LED above is off. Press the Anti-creasebutton. A 90 minute anti- crease phase is set. The display now shows the anti-crease icon. If this additional function is selected, the anti-crease phase at the end of the drying cycle is lengthened by 60 minutes. The laundry can be removed at any time during the anti-crease phase.

Alarm

The appliance is supplied with the Alarm function deactivated.

When activated, the buzzer sounds:

–At the end of the cycle

–When the anti-crease phase starts or ends

–When the cycle is interrupted

To activate it:

1.Choose the drying programme.

2.Press the Alarm button - the LED above is on.

To deselect the function press the Alarm button again. The LED above is off.

Time

Use the Time button to select the programme duration after setting the Time programme. You can select a programme duration from 10 mins to 2 hrs in 10-minute steps.

12