John Lewis JLTDC11 instruction manual Cleaning the door seal, Emptying the water reservoir

Models: JLTDC11

1 32
Download 32 pages 16.3 Kb
Page 17
Image 17

If the fine filter is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle has finished.

Emptying the water reservoir

Empty the water reservoir after every drying cycle.

If the water reservoir is full, an active programme will break off automatically and the warning lamp Full tank lights. In order to continue the programme, the water reservoir must first be emptied.

Warning! The condensed water is not suitable for drinking or for preparing foodstuffs.

1.Take out drawer containing water reservoir completely 1 and pull up the water reservoir's drainage pipe as far as it will go 2 .

2.

1.

2.Pour the condensed water out into a basin or similar receptacle.

3.Slide the outlet connections in and refit the water reservoir.

If the programme has been interrupted as a result of the water reservoir being full: Press the Start/Pause button to continue the drying cycle.

The water reservoir has a volume of approx. 4 litres.

The condensed water can be used as distilled water, e.g. for steam ironing. However it must first be filtered (e.g. with a coffee filter) to remove any residue and small pieces of fluff.

17

Page 17
Image 17
John Lewis JLTDC11 instruction manual Cleaning the door seal, Emptying the water reservoir