John Lewis JLTDC11 instruction manual Starting the programme, Changing programme

Starting the programme

Press the Start/Pause button. The programme starts.

The programme progress is shown by elapsing Dry time on LCD.

Putting in extra items or taking items out before end of programme

1. Open loading door.

Warning! Laundry and drum can become hot. Risk of burns!

2.Load or remove laundry items.

3.Close loading securely. Lock must audibly lock.

4.Press the Start/Pause button to continue the drying cycle.

Changing programme

To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to Off and then reset the programme.

The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the programme on the programme knob, the programme progress display and the maintenance indicators flash. If an option button (excluding the Alarm button) is pressed, Err appears in the multidisplay.

The drying programme is not however affected by this (laundry protection).

Drying cycle complete / removing laundry

Once the drying cycle is complete, the display shows the anti-crease icon and flashing "0" as well as warning lamps: Filter and Full tank . If the Alarm button has been pressed, an acoustic signal sounds intermittently for about one minute.

14