John Lewis JLTDH15 What to do if, Clean operating screen and housing, Cleaning the drum, Problem1

6.When necessary, approx. once every 6 months, remove the fluff from the heat exchanger using the sponge supplied.

When doing this, please use rubber gloves.

Tip: The fluff can be removed more easily if it is first dampened (e. g. with a laundry dampener) or with help of vacuum cleaner.

Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expected when removed from the dryer.

Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of the drum and drum ribs.

Clean operating screen and housing

Caution! Do not use furniture cleaners or aggressive cleaning agents to clean the machine.

Use a damp cloth to wipe down the operating screen and housing.

Cleaning the drum

Caution! Do not use abrasives or steel wool to clean the drum.

What to do if ...

Problem1)	Possible cause	Remedy
	Dryer not connected to mains supply.	Plug in at mains socket. Check fuse in
Dryer does		fuse box (domestic installation).
not work.	Loading door opened.	Close loading door
	The Start/Pause button not pressed.	Press the Start/Pause button.
	Incorrect programme set.	Set suitable programme. 2)
Unsatisfactor	Fluff filters clogged.	Clean fluff filters. 3)
y drying	Heat exchanger clogged.	Clean heat exchanger. 3)
results.
	Max. loading exceeded.	Respect max. loading volume.
	Covered ventilation grill.	Uncover ventilation grill in base area.

21