John Lewis JLWM1604 Load the laundry, Measure out the fabric softener, Measure out the detergent

Models: JLWM1604

1 28
Download 28 pages 11.94 Kb
Page 17
Image 17

Using the washing machine

Before the first wash, we recommend that you run a cotton cycle at 90°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

WASHING 7 KG OF WHITE COTTON AT 90°C

Suppose you have 7 kg of laundry to wash. It is white cotton and is suitable for high temperature washing.

1.Load the laundry

Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

3.Measure out the fabric softener

If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.

SM003

Close the drawer gently.

P0004

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into

the main wash compartment .

If you wish to carry out the prewash, a soak programme or a stain phase, pour detergent or stain remover into the appropriate compartment marked .

SM002

SM002

Important!

Do not use normal detergent for the “Stain” option, always use a STAIN remover.

4. Switch the machine on

Turn the selector dial to any programme to switch the machine on. The Start/Pause light starts to flash and the display shows the duration of the selected programme.

To switch the appliance off turn it to “Off”.

14 Minute wash

Off

90°

 

Spin

 

Economy 60°

Start/Pause

Drain

 

60°

Rinse

 

Economy 40°

 

Soak

 

40°

 

30°

 

30°

 

Hand wash

 

60°

 

Silk

 

40°

 

Delicates 30°

 

30°

 

Delicates 40°

 

Automatic

 

5.Select the desired programme/temperature

Turn the selector dial to the desired position (Cottons 90° in this case).

The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The Start/Pause button light will start flashing.

If your laundry needs a soak time, turn the programme selector dial to “Soak” and then, before starting a washing cycle, drain the water as described in the “Soak” paragraph.

17

Page 17
Image 17
John Lewis JLWM1604 Load the laundry, Measure out the fabric softener, Measure out the detergent, Switch the machine on