Using the washing machine
Before the first wash, we recommend that you run a cotton cycle at the highest temperature, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
Load the laundry
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
P0004
Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into
the main wash compartment 
.
If you wish to carry out the prewash or a stain phase, pour detergent or stain remover into the appropriate compartment marked 
.
Important! |
Do not use normal |
detergent for the “Stain” |
option, always use a Stain |
remover. |
SM002 |
SM002 |
Close the drawer gently.
Switch the machine on and select the desired programme
Switch the machine on by pressing button 2. Select the desired programme by pressing one of the buttons 3.
The running time is displayed in the
Select the desired temperature and spin speed
Press the button 5 repeatedly in order to select the desired temperature and the button 6 in order to select the desired spin speed, or «No Spin», «Rinse hold» or «Quiet» option.
Select the desired options
If your laundry is very dirty, it may be advisable to select the Prewash or Intensive option.
If your laundry has heavy stains and it is necessary to prolong the washing time, select the Stain option. The special detergent for stains (Stain remover) is loaded
from the compartment marked 
.
When Easy Iron option is selected, the laundry will be gently washed and spun to avoid creasing.
The relevant name will be displayed in the relevant rectangle (4.3).
Select the Extra rinse option
If you wish your appliance to perform an additional rinse press the button 8.
The relevant symbol icon and name will appear in the display.
Measure out the fabric softener
If required, pour fabric softener into the compartment marked 
, without exceeding the «MAX» mark.
SM003 |
Select the Delay start option
Before you start the programme, if you wish the start to be delayed, press the button 12 repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again.
Start the programme
Press the button 10. The relevant green light will stop flashing.
10
