4.7Wash time message:
•It is on when the washing cycle starts and when the duration is shown on the display.
•It goes off at the end of the cycle, and during the delayed start selection.
•It blinks during the time calculation if you have selected a «proportional» programme.
4.8Quick message: it appears when the QUICK option is selected.
4.9Delay start message: it appears during the selection of the delayed start.
4.10Child safety Lock symbol: it appears when this function is enabled. This function works in two different ways:
●If enabled before the «Start/Pause» button is pressed, it prevents the machine from being started.
Buttons (2, 3, 5, 6, 7, 8, 9, 10, 11 and 12)
«On/Off» / «Reset» programme button (2)
Press this button to switch the washing machine on. The green light of button 10 starts blinking. The pilot light relevant to the programme automatically proposed by the appliance lights up. The display goes on and shows some information about the selected programme.
Press this button again to switch the machine off.
Warning!
Always switch off the appliance by pressing button 2. (Cancel programme). This ensures that the new programme begins correctly and all previously set functions are cancelled.
«Programme selector» buttons (3)
Press these buttons repeatedly to select the programme on the basis of the type of laundry to be washed or a special programme. The pilot light relevant to the selected programme lights up. The washing machine proposes a temperature and automatically selects the maximum spin value provided for the
●If enabled after pressing the «Start/Pause» button, it prevents any changes being made to the programmes or options selected.
To enable or disable this function, press the «Temperature» and «Spin» buttons simultaneously for approx 6 seconds until the
icon 
appears on or disappears from the display.
Acoustic Signal
At the end of a washing cycle and in case of operating problems, an acoustic signal will sound.
You can deactivate the acoustic signal (except if there is a fault) by pressing the "Options" and the "Extra rinse" buttons simultaneously for about 5 seconds.
By pressing these buttons again the acoustic signal is reactivated.
programme you have chosen. You can change these values by operating buttons 5 and 6.
The duration of the selected washing programme is shown on the display (4.6).
The display also shows the options compatible with the programme (except Extra rinse, Quick and Delay start).
Warning!
If you press one of these buttons while a wash programme is running, the red pilot light of button 10 blinks three times and Err is displayed to show a wrong selection.
«Temperature» button (5)
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine (4.1).
Note!
To see the maximum and the minimum temperature provided for each of the washing programmes, see chapter «Washing Programmes».
7
