LDM: Lamp Driver Modules LDM-32, LDM-E32, and LDM-R32. See LDM technical bulletin.

ACM-8R:Remote Relay Module with eight Form-C contacts. Can be located up to 6,000 ft. (1828.8 m) from panel on four wires. See ACM-8R technical bulletin.

SCS: Smoke control station; eight (expandable to 16) circuits. See SCS technical bulletin.

RPT-485:Repeats EIA-485 over twisted pair or converts to fiber-optic medium. See RPT technical bulletin.

XP5: The XP5-M and XP5-C provide FlashScan® transponder points. See XP5 technical bulletin.

XP: The XP Series Transponder provides conventional monitor and control points (CLIP mode only). See XP Series technical bulletin.

XPIQ: The XPIQ quad intelligent voice transponder for distrib- uted multichannel voice evacuation systems, an integrated audio amplification and distribution subsystem controlled by FACP. Capable of playing up to four simultaneous messages. Accepts up to four 25-watt amplifiers. See XPIQ technical bulle- tin.

CHS-4:Chassis for mounting up to four APS-6Rs.

CHS-4L:Low-profile four-position Chassis. Mounts two AA-30 amplifiers or one AMG-E and one AA-30.

DP-1B:Blank Dress panel. Provides dead-front panel for unused tiers or to cover AA-30, AA-120, or one AMG-E and one AA-30.

CAB-4 Series: The CAB-4 Series cabinets are fabricated from 16-gauge steel. The cabinet assembly consists of two basic parts: a Backbox (SBB-_4), and a Locking Door (DR-_4) that may hinge right or left. Cabinets are available in four sizes, “A” through “D”, with one to four tiers. A trim ring option is available for semi-flush mounting. See CAB-4 Series technical bulletin.

COMPATIBLE DEVICES, EIA-232 PORTS

JPRN-5:80-column printer.

JPRN-6:80-column printer.

VS4095/S2: Printer, 40-column, 24 V. Mounted in external backbox. Order from Keltron, Inc.

CRT-2:Video display terminal.

COMPATIBLE DEVICES, EIA-485 PORTS

ACS Series: Remote serial annunciator/control systems.

FDU-80:Remote LCD display, 80 characters, with LEDs.

LCD-80:Remote LCD display, 80 characters.

LCD-80TM:Remote LCD display, 80 characters, terminal mode.

LDM Series: Remote custom graphic driver modules.

ACM-8R:Remote relay module. 8 Form-C relays.

RPT-485 Series: Repeater, isolator and/or fiber-optic modem.

UDACT: Universal Digital Alarm Communicator Transmitter, 636 channel.

UZC-256:Zone Coder. Up to 256 programmable codes.

COMPATIBLE INTELLIGENT DEVICES

BEAMHK: Heating kit for transmitter/receiver unit of FSB- 200(S) below.

BEAMHRK: Heating kit for use with the reflector of FSB-200(S) below.

BEAMLRK: Long-range accessory kit, FSB-200(S) below.

BEAMMRK: Multi-mount kit, FSB-200(S) below.

BEAMSMK: Surface-mount kit, FSB-200(S) below.

FSB-200:Intelligent beam smoke detector.

FSB-200S:Intelligent beam smoke detector with integral sensi- tivity test.

1951J: Low-profile FlashScan® ionization detector, will replace 1351J.

1351J: Low-profile FlashScan® ionization detector.

2951J: Low-profile FlashScan® photoelectric detector, will replace 2351J.

2351J: Low-profile FlashScan® photoelectric detector.

2951TJ: Low-profile FlashScan® photoelectric detector with 135°F (57°C) thermal, will replace 2351TJ.

2351TJ: Low-profile FlashScan® photoelectric detector with 135°F (57°C) thermal.

5951J: FlashScan® thermal detector 135°F (57°C), will replace 5351J.

5351J: FlashScan® thermal detector 135°F (57°C).

5951RJ: FlashScan® thermal detector 135°F (57°C) with rate- of-rise, will replace 5351RJ.

5351RJ: FlashScan® thermal detector 135°F (57°C) with rate- of-rise.

5951HJ: FlashScan® 190°F (88°C) high-temperature thermal detector.

DH300PL: Low-flow FlashScan® photo duct detector with housing.

DH300RPL: Low-flow FlashScan® photo duct detector with relay and housing.

2951TMJ: FlashScan® Acclimate low-profile multi-sensor detector.

FTX-P2J:FlashScan® HARSH™ Hostile Area Smoke Head.

7351J: FlashScan® VIEW® laser photo detector, will replace 7251J.

7251J: Low-profile VIEW® laser photo detector.

B224RB: Low-profile relay base.

B224BI: Isolator base for low-profile detectors.

B210LPJ: Low-profile base. Standard U.S. style.

B501J: European-style, 4" (10.16 cm) base.

B501BH: Sounder base, includes B501J base above. Constant tone.

B501BHT: Sounder base, includes B501J base above. Tempo- ral three tone.

M300MJ: FlashScan® monitor module.

M300DJ: FlashScan® dual monitor module.

M302MJ: FlashScan® two-wire detector monitor module.

M301MJ: FlashScan® miniature monitor module.

M300CJ: FlashScan® NAC control module.

M300RJ: FlashScan® relay module.

M300SMJ: FlashScan® pull station monitor module.

JBG-12LX:Manual fire alarm station, addressable.

M500XJ: Isolator module.

XP6-C:FlashScan® six-circuit supervised control module.

XP6-MA:FlashScan® six-zone interface module; connects intelligent alarm system to two-wire conventional detection zone.

XP6-R:FlashScan® six-relay (Form-C) control module.

XP10-M:FlashScan® ten-input monitor module.

XPIQ: Intelligent quad transponder.

OTHER OPTIONS

DPI-232:Direct Panel Interface, specialized modem for extend- ing serial data links to remotely located FACPs and/or peripher- als.

LEM-320:Loop Expander Module. Expands each 640 to two Signaling Line Circuits.

JCI-6856:A • 12/01/06 — Page 7 of 9

Page 6 Page 8
Page 7
Image 7
Johnson Controls IFC-640 manual Compatible DEVICES, EIA-232 Ports, Compatible DEVICES, EIA-485 Ports, Other Options
Page 6 Page 8

IFC-640 specifications

Johnson Controls IFC-640 is a pioneering fire alarm control panel that integrates advanced technologies to ensure safety and protection in commercial and industrial applications. As a part of the Johnson Controls extensive portfolio, the IFC-640 offers detailed monitoring and control capabilities, making it a reliable choice for fire management systems.

One of the standout features of the IFC-640 is its robust addressable technology. This system allows for precise identification of each alarm device, enabling quick location tracking during emergencies. The incorporation of intelligent algorithms enhances the panel's ability to distinguish between actual fire events and false alarms, thereby improving overall response efficiency.

Another significant characteristic of the IFC-640 is its user-friendly interface. The panel is equipped with a color LCD display that provides real-time status updates on the system’s operation. This visual clarity ensures that operators can quickly comprehend alerts and other vital information. The intuitive navigation allows users to manage settings and view system events with ease, minimizing the training required for new personnel.

The IFC-640 also boasts a modular architecture, allowing for seamless scalability. This feature enables the system to adapt to varying building sizes and complexities without needing extensive upgrades. Integration capabilities with third-party systems facilitate compatibility with existing infrastructure, making the IFC-640 a versatile choice for a diverse range of environments.

Network capabilities are enhanced with the panel's ability to connect monitoring stations and multiple units in a single system. This networking function allows for centralized management of multiple installations, improving overall safety management across large campuses or facilities.

Safety and reliability are further reinforced by the IFC-640’s built-in redundancy features. This ensures continuous operation even in the event of a power outage, providing peace of mind to facility managers and stakeholders.

In summary, the Johnson Controls IFC-640 fire alarm control panel exemplifies cutting-edge engineering with its addressable technology, user-friendly interface, modular design, and robust networking capabilities. With these features, it stands as an effective solution for safeguarding lives and property against fire hazards.
Top Page Image Contents