Emergency |
|
|
| |
Heat | Humidity | Status | Settings | |
| Fan | |||
| Dealer | Tools | Clean | Schedule |
| Alert: Change Filter |
| Close | |
|
|
|
| |
|
|
|
| |
Fan Adjust |
|
|
| |
|
|
|
| Show Fan on |
|
|
|
| Home |
| Function: Auto | Manual | Schedule | |
| xx% | 45% |
| 100% |
|
|
| ||
Run fan | 30 minutes | Per Hour |
|
|
|
|
| Cancel | OK |
|
|
|
|
|
2.Press Fan icon.
3.Select the Fan function.
a.Auto – runs only with equipment.
b.Manual – runs intermittently to circulate air. NOTE: Manual mode is not available for all sys- tems.
i.Adjust the speed of your fan motor. NOTE: The lower the speed the less electricity con- sumed.
ii.Select the fan run time. Choices are 15, 30, and 45 minutes per hour or Always.
c.Schedule – follows program schedule fan settings (see Page 9 for more information).
NOTE: Schedule option is only available in pro- grammable modes.
4.Select check box to display fan icon on home screen.
5.Press OK when you are done.
HUMIDITY SETTINGS
In
1. Press Menu.
NOTE: Or press the quick access Humidity icon on the right side of your screen.
2.Press Humidity icon.
3.Select the Humidity mode.
a.Humidification – Select the Heat mode sym- bol.
b.Dehumidification – Select the Cool mode symbol.
4.Select Humidity function.
a.Auto – Automatically sets the humidity set- point based on indoor temperature.
NOTE: Auto mode requires an outdoor sensor.
b. Manual – Manually set the humidity setpoint.
i. Select your desired indoor humidity percentage level.
NOTE: If you start seeing condensation building up on your windows, lower the humidity setpoint or switch to auto mode.
|
|
| Show Humidity |
When Heating... |
| Level on Home | |
Auto | Manual | Schedule | |
|
| Cancel | OK |
|
|
| Show Humidity |
When Heating... |
|
| Level on Home |
Auto Manual Schedule
45%
100%
Cancel OK
c. Schedule – Follows program schedule humidity settings (See Page 9 for more information). NOTE: Schedule option is only available in programmable modes.
5.Select check box to display humidity information on home screen.
6.Press OK when you are done.
Johnson Controls Unitary Products | 7 |