MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the main- tenance and service work described in this Operator’s Manual. More extensive work must be carried out by an authorised service workshop.

 

Maintenance

Daily

Weekly

Monthly

 

Maintenance Maintenance

Maintenance

 

 

 

Clean the outside of the machine.

 

X

 

 

Make sure the throttle trigger lock and the

 

 

 

 

throttle function correctly from a safety point

 

X

 

 

of view.

 

 

 

Check that the stop switch works correctly.

 

X

 

 

Check that the cutting attachment does not

 

 

 

 

rotate at idle.

 

X

 

 

Clean the air filter. Replace if necessary.

 

X

 

 

Check that the cutting attachment guard is

 

 

 

 

undamaged and not cracked. Replace the

 

 

 

 

cutting attachment guard if it has been

 

 

 

 

exposed to impact or is cracked.

 

X

 

 

Check that the trimmer head is undamaged

 

 

 

 

and not cracked. Replace the trimmer head

 

 

 

 

if necessary.

 

X

 

 

Check that the locking nut of the cutting

 

 

 

 

equipment is tightened correctly.

 

X

 

 

Check that nuts and screws are tight.

 

X

 

 

Check that there are no fuel leaks from the

 

 

 

 

engine, tank or fuel lines.

 

X

 

 

Check the starter and starter cord.

 

X

 

 

Clean the outside of the spark plug. Re-

 

 

 

 

move it and check the electrode gap. Adjust

 

 

 

 

the gap to 0,6 mm or replace the spark plug.

 

 

 

 

Check that the spark plug is fitted with a

 

 

 

 

suppressor.

 

X

 

 

Clean the outside of the carburetor and the

 

 

 

 

space around it.

 

X

 

 

Check that the bevel gear is filled three--

 

 

 

 

quarters full with lubricant. Fill if necessary

 

 

 

 

using special grease.

 

X

 

 

Check the fuel filter from contamination and

 

 

 

 

the fuel hose from cracks or other defects.

 

 

 

 

Replace if necessary.

 

 

X

 

Check all cables and connections.

 

 

X

 

Check the clutch, clutch springs and the

 

 

 

 

clutch drum for wear. Replace if necessary

 

 

 

 

by an autorized service workshop.

 

 

X

 

Replace the spark plug. Check that the

 

 

 

 

spark plug is fitted with a suppressor.

 

 

X

 

Clean or replace the spark arrestor mesh

 

 

 

 

on the muffler.

 

 

X

115304126 Rev. 2 7/15/10

English--- 23

Page 23
Image 23
Jonsered BC 2128 manuel dutilisation Maintenance schedule, Maintenance Daily Weekly Monthly Maintenance Maintenance