Jonsered BC 2128 Machine’s safety equipment, Throttle lock-out, Wear anti--slip and stable boots

GENERAL SAFETY PRECAUTIONS

GLOVES

Gloves should be worn when necessary, e.g., when fitting cutting attachments.

BOOTS

Wear anti--slip and stable boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing that can catch on shrubs and branches. Always wear heavy, long pants. Do not wear jewelry, shorts sandals or go barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

A first aid kit should be carried by opera- tors of clearing saws, brushcutters or trim- mers.

Machine’s safety equipment

This section describes the machine’s safe- ty equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the “What is what” section to locate where this equipment is positioned on your machine. The life span of the machine can be re- duced and the risk of accidents can in- crease if machine maintenance is not car- ried out correctly and if service and/or re- pairs are not carried out professionally. If you need further information please contact your nearest service workshop.

IMPORTANT! All servicing and repair work on the machine requires special training. This is especially true of the machine’s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of pro- fessional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your near- est service agent.

WARNING: Never use a machine that has faulty safety equipment! Follow the control, maintenance and service instructions described in this section. If your machine fails any of these checks contact your service agent to get it repaired.

Throttle lock-out

The throttle lock--out is designed to prevent accidental operation of the throttle control. When you press the lock--out (A) (i.e. when you grasp the handle) it releases the throttle control (B). When you release the handle, the throttle control and the throttle lock--out both move back to their original positions. This movement is controlled by two independent return springs. This ar- rangement means that the throttle control is automatically locked at the idle setting.

Make sure the throttle control is locked at the idle setting when the throttle lock--out is released.

Press the throttle lock--out and make sure it returns to its original position when you re- lease it.

Check that the throttle control and throttle lock--out move freely and that the return springs work properly.

115304126 Rev. 2 7/15/10 English--- 6