Rear Wheel Brakes
•Before placing any child into the stroller or removing them from the stroller, be certain that the rear wheel brakes are engaged.
•To engage the rear wheel brakes, push down on one of the brake levers located on each of the rear wheels. See Figure 10. The stroller may require slight forward or rearward movement in order to line up the teeth on the brake with each wheel brake cluster.
•Check that the brakes are properly applied by attempting to push the stroller backwards and forwards.
•To release the brakes, gently lift up either one of the brake levers. See Figure 11.
!WARNING
Always make sure BOTH wheel brakes are engaged when the stroller is not being pushed so that the stroller will not roll away. Never leave stroller unattended, especially on a hill or incline, as the stroller may tip over or slide.
Figure 10 | Figure 11 |
Adjusting the Leg Support
The leg support can be adjusted to two positions – horizontal or all the way down.
•To place the leg support into the horizontal position, pull up on both sides of the leg support until it is locked into position. See Figure 12.
•Push down on both sides of the leg support to ensure it is secure.
Page | Groove Instruction Manual |
