Securing the Child
•Note that there are three height adjustment positions for the shoulder harness straps. For a younger child, the shoulder harness straps should be positioned through the lower opening. For a taller child, the shoulder straps should be positioned through the center or top openings to ensure a good fit.
•Make sure that both shoulder straps are attached to the waist strap buckles. See Figure 15.
•Unlatch the waist/shoulder buckle by squeezing in on both sides of the buckle latch and removing the male ends of each buckle.
•Carefully place the child in the stroller seat with the shoulder straps over their shoulders and chest. Then place the crotch strap between the child’s legs.
•Bring the seat belt around the child’s waist and insert the male ends of the waist/ shoulder buckle into the female buckle. Make sure that they snap into place. See Figure 16. Tighten the waist belt to be snug around the child’s waist.
•NOTE that when using the headrest for a younger child, the shoulder straps may be positioned through the upper set of slots in the headrest. Unbuckle the shoulder straps from the waist/shoulder buckle and feed these straps through these slots, ensuring that the straps are not twisted. Buckle the shoulder straps onto the waist/shoulder buckle to secure them. When using the headrest for a taller child, the shoulder straps may be positioned through the lower set of slots.
•Both the shoulder straps and the waist/crotch straps may be adjusted using the sliding buckles on these straps. See Figure 17.
Figure 15 | Figure 16 | Figure 17 |
!WARNING
Avoid serious injury from falling or sliding out. Always use the safety
harness.
Page | Groove Instruction Manual |
