Figure 13 | Figure 14 |
Rear Wheel Brakes
•Before placing any child into the stroller or removing them from the stroller, be certain that the rear wheel brakes are engaged.
•To engage the rear wheel brakes, push down on either the left or right brake pedal until you hear an audible “click”. See Figure 15.
•Check that the brakes are properly applied by attempting to push the stroller backwards and forwards.
•To release the brakes, pull up on either the left or the right brake pedal, with your toe, until you hear an audible “click”. See Figure 16.
Figure 15 | Figure 16 |
!WARNING
Always make sure the wheel brakes are engaged when the stroller is not
being pushed so that the stroller will not roll away.
Never leave stroller unattended, especially on a hill or incline, as the stroller
may tip over or slide.
Kooper Instruction Manual | Page 6 |
