Joovy Joovy Kooper, 30X Series manual Unfolding the Stroller, Installing/Removing the Front Wheels

Models: 30X Series Joovy Kooper

1 16
Download 16 pages 61.04 Kb
Page 4
Image 4
Unfolding the Stroller

Unfolding the Stroller

Keep children away from stroller while unfolding.

Orient the stroller with the handle bars closest to you.

Release the folding lock strap located on the left side by lifting the strap off of the extended rivet and rotating it out of the way. Note: You may need to push the stroller closer together to do this. See Figure 2.

While holding the handle bar with one hand, push down on the front edge of the stroller to unfold it. Then hold the handle bars and push down on the lower step of the primary lock at the rear center of the stroller with your foot to engage the lock. See Figure 3.

CAUTION: While unfolding the stroller, be careful to keep your fingers from being pinched by moving parts.

Ensure that the stroller is completely opened and this primary lock is secured before ANY use of the stroller.

Figure 2

Figure 3

Installing/Removing the Front Wheels

Take one front wheel and insert the metal post into the front wheel housing located at the bottom front of the stroller until an audible click is heard. See Figure 4.

Pull downward on the wheel to ensure the wheel is installed properly.

Repeat this procedure for the other wheel.

To remove a wheel, pull downward on the wheel while pushing the button behind the front wheel housing. See Figure 5.

Figure 4

Figure 5

Page 3

Kooper Instruction Manual

Page 4
Image 4
Joovy Joovy Kooper, 30X Series manual Unfolding the Stroller, Installing/Removing the Front Wheels