Equipment Rack Mounting
NetScreen-ISG 2000 15
Equipment Rack Accessories and Required Tools
Rack mounting requires the following accessories and tools:
•1 Phillips-head screwdriver (not provided)
•4 screws to match the rack (if the thread size of the screws provided in the
NetScreen-ISG 2000 product package do not fit the thread size of the rack)
•The included rear slide mount kit (for the rear-and-front-mount method)
There are two ways to rack mount the NetScreen-ISG 2000:
•Mid-mount
•Rear-and-front mount
Note: NetScreen strongly recommends the rear-and-front rack mount configuration.
Slides (2)
Rear mount brackets (2)
10-32 x ½” Screws (8)
M4 Screws (6)
Rear Slide Mount Kit