Use of Claris filter cartridges, Placing filter

7. Use of Claris filter cartridges

Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the brochure “Claris. Tough to calcium deposits, gentle to your coffee machine“.

7.1 Placing filter

Pull up cartridge mounting. Pressing lightly, place the filter cart- ridge in the water tank (Fig. 2).

Pull down cartridge mounting, until it engages audibly.

Fill water tank with cold, fresh tap-water and replace it.

Switch the machine on by pressing key ON/OFF.

Open front cover (3) and press key P until you hear an acoustic signal.

PRESS KEY / POWDER QUANTITY

Press key + several times until the following message appears:

FILTER NO

By pressing key P you can hear an acoustic signal.

NO flashes

You can alter the setting by pressing key - or + .

YES flashes

To confirm press key P . An acoustic signal can be heard.

RINSE FILTER / PRESS STEAM

Place a sufficiently large container (approx. 1 litre) under the pivoting nozzle (20) and press coffee key .

PLEASE WAIT / FILTER RINSING. The drawing off of water will stop automatically.

FILTER YES

Press key N .

COFFEE READY

The water might be slightly discoloured (this is not damag- ing to the health).

7.2 Replacing of filter

After drawing off 50 litres the filter loses its effect.

REPLACE FILTER

If only a little water is drawn off the filter should be changed every 2 months. However no message will appear on the display. You will find a special turntable on the cartridge mounting to set the replacement date.

Empty water tank and pull up cartridge mounting. Pressing lightly, place the filter cartridge in the water tank (Fig. 2).

Pull down cartridge mounting, until it engages audibly.

Fill water tank with cold, fresh tap-water and replace it.

Switch the machine on by pressing key ON/OFF .