14.4 Fill beans
FILL BEANS
Fill beans as described in chapter 3.3.
The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the machine for this purpose.
14.7 Unit calcified
UNIT CALCED
The machine signals when decalcifying becomes necessary.
Under the correct implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further indications read Chapter 7 “Use of Claris filter cart- ridges“.
14.5 Removing foreign objects
Switch off your machine by pressing ON/OFF key 
.
Remove plug from power socket.
Open bean container (13) and remove the beans. The remaining beans can be removed with a vacuum cleaner.
Loosen both screws in the bean container and then remove container (Fig.5 + 6)
Remove any remaining beans with a vacuum cleaner.
Put the spanner on (Fig.7).
Now turn spanner anticlockwise until the foreign object loosens.
Remove remaining powder with a vacuum cleaner.
Replace bean container and fasten screws.
14.6 Clean machine
CLEAN UNIT
After coffee, etc., has been drawn off 220 times or after 180 rinsing programs have been run, the machine must be cleaned. You can continue to draw off coffee and hot water / steam. However we recommend that you clean the machine (as described in chapter 15) within the next few days.
CLEAN NOW
An acoustic signal indicates the need of an immediate cleaning.
14.8 | Cleaning metal contacts |
| |
EMPTY TRAY / CLEAN CONTACTS |
| ||
The remnants of the calcified deposits in the area of the metal |
| ||
contacts must be removed. Proceed as follows: |
| ||
Rinse fastenings in groove (B) as well as the metal contacts (A) |
| ||
with hot water and some |
| ||
fastenings in groove (B) as well with a brush (Fig. 8). |
| ||
E | |||
14.9 | General cleaning instructions | ||
| |||
Never use abrasive articles or corrosive chemicals to clean your machine.
Wipe down the casing inside and out using a soft, damp cloth.
Clean the pivoting nozzle after every use.
After warming milk, draw off some hot water to clean the pivoting nozzle inside.
You can take off the
The water tank should be rinsed and filled with clean water daily.
If you notice any furring in the water tank, this can be de- calcified separately with a customary decalcifying agent. Remove the tank from the machine for this purpose.
If a Claris filter cartridge is used, remove it beforehand.
17
