11.5 Machine furred
Your machine will become furred in the course of normal use. The amount of furring depends on the hardness of your water. The ma- chine registers when descalcifying becomes necessary and signals this via warning lamp . You can still draw off coffee and
11.6 Use of Claris filter cartridges
At the correct use of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For further information, please read the instructions for use attached to the water tank.
Note: Furring display must be switched off (as described in chapter 3.6) before using Claris filter cartridges.
11.7 General cleaning instructions
Never use sharp or abrasive articles or corrosive chemicals to clean your machine.
Wipe down the casing inside and out using a soft damp cloth.
Clean the pivoting
After warming milk, draw off a little
You can take off the pivoting nozzle for a thorough cleaning (Fig. 8).
The water tank should be rinsed out and filled with clean water daily.
Note: If you notice any furring in the water tank, this can be descalcified separately with a customary decalcifying pro- duct. Remove the tank from the machine in order to do this.
11.8 Regular servicing
Regular Jura services ensure your machine’s reliability and longer life. Keep the original packaging to protect the machine when it is transported.
11.9 Empty system
Important: This process is necessary to protect the machine from frost damages while being transported.
Press button to switch off the machine.
Place a container under the pivoting nozzle (13)
Turn selector switch for
Press button to switch on the machine. Warning lamps ,
, , flash.
Press button until only warning lamp flashes. Steam comes out after a short time.
Draw off steam until it stops automatically.
Turn selector button for
.
12. Cleaning
The machine has an integrated cleaning program.
Note: Whenever the machine needs cleaning, warning lamp
lights up. You can still draw off coffee and
Only use Jura cleaning tablets. These are available from your Jura dealer.
Important: It is essential not to interrupt the process once it has been started.
12