11. Drawing off hot water

 : SELECT PRODUCT

Place a cup under the pivoting nozzle (18) and press the draw- off key .

 : PORTION HOT WATER

The draw-off of the programme portion of hot water stops auto- matically.

You can interrupt the draw-off prematurely at any time by pressing the draw-off key again.

When water is drawn off, there can be splattering at the beginning. The pivoting nozzle becomes hot. Avoid direct contact with the skin.

12. Drawing off steam

 : SELECT PRODUCT

Place a cup with the liquid to be heated under the pivoting nozzle (18) and press the draw-off key .

 : STEAM ACTIVE

To end the draw-off of steam, press the key .

When steam is drawn off, there can be splattering at the beginning. The pivoting nozzle becomes hot. Avoid direct contact with the skin.

13. Drawing-off milk froth

 : SELECT PRODUCT

Pour milk / Tetra Pak into a jug and immerse the cappuccino tube into the milk.

Place 1 cup under the coffee spout (4) and press the draw-off key .

The programme amount is prepared and stops automatically.

You can interrupt the draw-off prematurely at any time by pressing the draw-off key again.

10 min. after the draw-off of milk, a rinsing is automatically started. The rinsing is announced in advance by an acoustic signal.

14. Switching the machine off

Switch the machine off with the ON/OFF operating switch. A rinsing is automatically started when the machine is switched off.

15. Programming

The following phases can be programmed:

Grinding amount

Temperature

Amount of water

Amount of milk

Portion of hot water

Water hardness

Clock

Machine on

Machine off

Draw-offs

Language

15.1 Programming grinding amount

Switch your machine on the with ON/OFF operating switch.

Press the key PROG. until an acoustic signal is heard.

 : ADJUST COFFEE QUANTITY /

SELECT PRODUCT

Press the required draw-off key.

 : (selected product)

..............II.............. +

By pressing the key + or - you can determine the amount to be ground.

To store, press the key PROG.

 : (selected product)

:100% : 0%

You can determine the allocation of the grinder “left” or “right”.

 By pressing the key + or - you can change the values.

E

 

 To store, press the key PROG.

 



: ADJUST COFFEE QUANTITY /

 

 

SELECT PRODUCT

 

 Press the required draw-off key, the key + in order to reach the

 

 

next phase or the key EXIT to quit the programming.

 

15.2 Programming Temperature

 



: ADJUST TEMPERATURE / SELECT PRODUCT

 

 Press the required draw-off key.

 



: (selected product)

 

 

STAND. TEMP.

 

Select the required temperature with the keys + or - (high or standart)

To store, press the key PROG.

 : ADJUST TEMPERATURE / SELECT PRODUCT

Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming.

15.3 Programming amount of water

 : ADJUST WATER QUANTITY /

SELECT PRODUCT

Press the required draw-off key.

 : (selected product)

WATER 90 ML

You can change the value by pressing the key + or - .

To store, press the key PROG.

 : ADJUST WATER QUANTITY /

SELECT PRODUCT

Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming.

15.4Programming amount of milk

 : ADJUST MILK QUANTITY / SELECT

PRODUCT

Press the key or

 : (selected product)

10SEC.

You can alter the time by pressing the keys + or - (draw-off time from 3 – 60 sec.)

To store, press the key PROG.

 : ADJUST MILK QUANTITY / SELECT

PRODUCT

Press the required draw-off key, the key + in order to reach the next phase or the key EXIT to quit the programming.

9

Page 9
Image 9
Jura Capresso IMPRESSA X7 Drawing off hot water, Drawing off steam, Drawing-off milk froth, Switching the machine off