Jura Capresso IMPRESSA X7 Installing the filter, Adjusting the grinder, Replacing the filter

We recommend that you also readjust the grinder after:

–a change of sort of coffee beans

–extreme changes of the degree of grinding

–service

9.1 Installing the filter

First installation of a Claris filter cartridge must be carried out by a service engineer. Contact your service partner.

7. Adjusting the grinder

You have the opportunity of adapting the grinder to the roast of your coffee. We recommend the following:

for a light roast	a finer adjustment
for a dark roast	a coarser adjustment

To adjust the grinding, turn the setting rings into the required position (Fig. 2)

You have the following options:

the smaller the dots, the finer the grinding the larger the dots, the coarser the grinding

The grinding may only be adjusted with the grinder in operation.

8. Adjustment of water hardness

Water is heated in the machine. This leads to scale as a result of use, which is automatically shown on the display. The machine must be adjusted to match the hardness of the water used. For this, please use the enclosed test stick.

1° water hardness on the German scale corresponds to 1.79° on the French scale.

The machine has 5 hardness settings to choose from. The indica- tions on the display mean:

WATER HARDNESS
LEVEL —	Water hardness function switched off
WATER HARDNESS	German water hardness 1 – 7°
LEVEL 1	French water hardness 1.79 – 12.53°
WATER HARDNESS	German water hardness 8 – 15°
LEVEL 2	French water hardness 14.32 – 26.85°
WATER HARDNESS	German water hardness 16 – 23°
LEVEL 3	French water hardness 28.64 – 41.14°
WATER HARDNESS	German water hardness 24 – 30°
LEVEL 4	French water hardness 42.96 – 53.7°

In the factory, the machine is set to hardness level 3. You can alter this setting. Proceed as follows:

Switch the machine on with the ON/OFF operating switch.

 : PLEASE WAIT

Press the key PROG. (I) until an acoustic signal is heard.

 : AJUST COFFEE QUANTITY / SELECT PRODUCT

Press the key + until the following report appears:

 : WATER HARDNESS LEVEL 3

Press the key PROG., an acoustic signal is heard and the level set flashes.

By pressing the key - or + you can set the required level. To store, press the key PROG. An acoustic signal is heard.

Press the key EXIT (K).

9. Installing the Claris filter cartridge

If the Claris filter cartridge is installed properly you don’t have to de-scale your machine anymore. For more infor- mation on the Claris filter cartridge refer to the brochure “Claris. Hard on limescale. Gentle on your coffee machine.”

9.2 Replacing the filter

After drawing off 50 liters the filter cartridge will be used up.

 : Replace water filter

1.Switch off your Impressa X7.

2.Press the following key combination (Fig. 11). NB: Press the keys at the same time.

 : OK

3.Empty the water tank and install the filter cartridge together with the cartridge holder in the water tank, applying a gentle pressure downward. Move back the cartridge holder until it engages audibly (Fig. 12).

4.Fill the water tank with cold, fresh tap water and reinstall it.

5.After replacing the filter draw off 0.5 liters of water.

The water may be slightly coloured (not harmful)

10. Coffee

10.1 Drawing off coffee / espresso

 : SELECT PRODUCT

Place 1 or 2 cups, as necessary, under the coffee spout (4) and press the required selection switch. The pre-brew system (I.P.B.A.S©) moisturises the coffee powder, briefly interrupts the discharge and then starts the actual brewing procedure.

You can interrupt the draw-off prematurely by pressing any of the coffee draw-off buttons. In order to obtain outstanding froth, you can adapt the coffee spout (4) individually to match the size of your cups.

10.2 Drawing off cappuccino

 : SELECT PRODUCT

Put milk / Tetra Pak into a jug and immerse the cappuccino tube into the milk.

Place 1 cup under the coffee spout and press the draw-off key

. The machine firstly prepares the milk froth, then the coffee (Fig. 3).

You can interrupt the milk froth and the coffee prematurely by pressing the draw-off key once more.

10Min. after the draw-off of cappuccino, a rinsing is auto- matically started. The rinsing is announced in advance by an acoustic signal.

10.3Drawing off pots of coffee

 : SELECT PRODUCT

Place 1 pot under the coffee spout (4) and press the draw-off key (pot of coffee). Your pot of coffee is brewed in a number of cy- cles. The number of cycles is shown in the display.

You can interrupt the draw-off prematurely at any time by pressing the draw-off key again.

8