Jura Capresso IMPRESSA X7 Programming portion of hot water, Programming water hardness, Draw-offs

15.5 Programming portion of hot water

Place a cup under the pivoting nozzle (18).

 : HOT WATER PORTION / PRESS FOR HOT

WATER

 : ENOUGH HOT WATER ? / PRESS FOR HOT

WATER

 : HOT WATER PORTION / PRESS FOR HOT

WATER

Press the key + in order to reach the next phase or the key EXIT to quit the programming.

15.6 Programming water hardness

 : WATER HARDNESS LEVEL 3

Press the key PROG.

You can set the water hardness by pressing the keys + or - .

To store, press the key PROG.

Press the key + in order to reach the next phase or the key EXIT to quit the programming.

To determine the water hardness, please read Chapter 8 “Setting the water hardness”

15.7 Programming CLOCK

Programming the clock is necessary if the function “Machine on” is used.

 : TIME. —:—

Press the key PROG.

 By pressing the keys + or - you can set the hours.

To store, press the key PROG.

 By pressing the keys + or - you can set the minutes.

To store, press the key PROG.

Press the key + in order to reach the next phase or the key EXIT to quit the programming.

15.8 Programming machine on

Programming the clock is necessary if the function “Machine on” is used.

 : UNIT ON —:—

Press the key PROG.

 By pressing the keys + or - you can set the hours.

To store, press the key PROG.

 By pressing the keys + or - you can set the minutes.

To store, press the key PROG.

Press the key + in order to reach the next phase or the key EXIT to quit the programming.

The display —:— means that the function is switched off

15.9 Programming machine off

 : UNIT OFF

5.0HRS.

Press the key PROG.

By pressing the keys + or - you can set the hours (switched off or 0.5 hrs. – 9 hrs.).

To store, press the key PROG.

Press the key + in order to reach the next phase or the key EXIT to quit the programming.

15.10 Draw-offs

 : AUDIT TRAIL (total audit trail)

Press the required draw-off key to inquire the draw-offs.

Press the key + in order to reach the next phase or the key EXIT to quit the programming.

Draw-offs of steam cannot be inquired.

15.11 Programming language

Press the key PROG.

By pressing the keys + or - you can select the required language.

To store, press the key PROG.

Press the key + in order to reach the next phase or the key EXIT to quit the programming.

16.Care and maintenance 16.1 Fill water

 : FILL WATER TANK

When this display lights up, no more drawing-off is possible. Fill with water as described under Section 3.3.

The water tank should be rinsed out every day and filled with fresh water.

If you use an automatic filling device, we recommend that you rinse the water tank out regularly and fill it up with fresh water.

16.2 Installation of an automatic filling device

Please read the operating instructions of the automatic filling device.

16.3 Empty grounds container

The grounds container collects the coffee grounds.

 : EMPTY DRAWER

When this display lights up, no more draw-offs are possible and the grounds container must be emptied.

Carefully remove the drip tray – there is water in it. Then re- move the grounds container (Fig. 4).

16.4 Empty drip tray

 : EMPTY DRIP TRAY

When this display lights up, no more draw-offs are possible and the drip tray must be emptied.

Carefully remove the drip tray – there is water in it (Fig. 4).

16.5 Grounds container missing

 : DRAWER MISSING

When this display lights up, the grounds container has not been inserted properly or is missing.

16.6 Drip tray missing

 : DRIP TRAY MISSING

When this display lights up, the drip tray has not been inserted properly.

10