on
tI
INSTALLING THE BUTTON-TYPE BATTERY
Installation for the internal clock (battery release) switch
1.Open the LCD screen, then slide the BATT. (battery release) switch in the arrow direction to remove the battery pack.
2.Remove the battery cover.
3.insert the
Position the button type battery with the positive (+) terminal face out in the button type battery slot.
Battery installation for the internal clock
The button type batte_, maintains the clock function and preset contents of the memory : even if the battery pack or AC power adapter is removed.
The button type battery for the DVD camcorder lasts about 6 months under normal operation from the time of installation.
When the button type battery becomes weak or dead, the date/time indicator will display
"JAN/01/2008 12:00 AM" when you turn the date and time display on.
Installing the
1, Turn the battery holder counterclockwise (as indicated with (®) mark) using your fingernail or a coin to open it, The battery holder opens.
2, Insert the battery into the battery holder with the positive (+) terminal facing down and press it firmly until you hear a locking sound.
3.Place the battery holder back in the remote control, matching its (0) mark with the (¢) mark on the remote control, and turn the battery holder clockwise to lock it.
Precautions regarding the button type battery
,,There is a danger of explosion if button type battery is incorrectly replaced. Replace only with the same or equivalent type.
•Do not pick up the battery using tweezers or other metal tools. This wilt cause a short circuit.
oDo not recharge, disassemble, heat or immerse the battery in water to avoid the risk of explosion.
Keep the button type battery out of the reach of the children. Should any battery
wA,._._be swallowed, seek medical attention immediately.
14_ English
L_ s'._Ich
1 _ °
3 ° °I
°ol
