troubleshootine
k_J
Symptom | ::; | : | Explanation/Solution | ..... | :: | : |
The actual recording time is less than the estimated recording time.
The recording stops automatically.
When recording a subject illuminated by bright light, vertical line appears.
When the screen is exposed to direct sunlight during recording, the screen becomes red or black for an instant.
During recording, the date/time does not display.
You cannot record a photo image.
There is a time difference between
the point where you press Recording start]stop button and the point where
the recorcted movie starts/stops,
The aspect ratio (16:9/4:3) of a movie cannot be changed.
•The estimated recording time is calculated by some references.
•When you record an object that moves fast, the actual recording time may be shortened.
The internal temperature of your camcorder is extremely low. Keep it turned on and wait until it warms up.
•If you make a frequent recording or deletion of files, the performance of the storage media will deteriorate. In this case, format the storage media again.
otf you use the memory card with low writing speed, the DVD camcorder automatically stops recording the movie images then the corresponding message appears on the LCD screen.
o This is not a malfunction.
•This is not a malfunction.
• "Date/Time" is set to "Off." Set the "Date/Time" to on. _page 29
oSet your camcorder to the digital camera (memory card) record mode.
_, page 30
ti Release the lock on the
oThe memory card is full. Use a new memory card or format the memory card.
Or remove unnecessary images.
oYou cannot take photo images on a disc. Set the Storage mode switch to CARD.
. On your camcorder, there may be a slight time delay between the point when you press Recording start/stop button and the actual point where the
recorded movie starts/stops. This is not an error.
. The aspect ratio of a movie at I6:9 cannot be changed to 4:3.
108 English
