Adjusting the image during recording
| Explanation/Solution | _: i | : | :_ | ..... | |
| • Set "Focus" to "Auto." |
|
|
| ||
Focusdoes not adjust | o | The recordingconditions are not suitablefor auto focus. |
|
| ||
automatically. |
| Adjust the focus manually. _page | 70 |
|
| |
| • | The lens is dusty on the surface. Clearthe lensand check the focus. | ||||
| o | This may occur when you make a recording undera fluorescent,sodium or | ||||
The image appearstoo bright or |
| mercury lamp. |
|
|
|
|
flickering,or changes in color. |
| Cancel "Scene Mode (AE)" to avoid or minimize the phenomena. _page 65 | ||||
|
| |||||
Image'scolor balanceis not | ,, | White balanceadjustment is required.Adjust to the proper "White Balance." | ||||
natural. |
| _page 66 |
|
|
|
|
Playback on your DVD camcorder
Symptom: :i :: :
Using the playback (Play/Pause) function does not start playing.
The Skip or Search function does not work properly.
....
. Press the MODE button to set to the Play mode.
•Images recorded using another device may not be played on your DVD camcorder. ° Select a proper storage media.
•Check out the memory card compatibility. _page
,,If the temperature inside the camcorder is too high, it may not function properly. Turn the camcorder off, and turn it on again a little later.
Connecting/Dubbing with other devices (TV, DVD players, etc)
Symptom | :Explanation/Solution: | [ | : | ; .... |
You cannot view the image or hear the sound from the
connected device.
The image appears distorted on a 4:3 TV.
You cannot dub correctly using the AV cable,
,Connect the audio of the audio/video cable to your camcorder or to the connected device (TV, DVD recorder, etc). (Red color- right, White color- left)
oThe connection cable (AV cable) is not connected properly. Make sure that the connection cable is connected to the proper jack. _',pages
•This happens when viewing an image recorded in 16:9 wide mode on a 4:3 TV,
if you want to display properly on your TV, check out your TV type and set the proper screen mode ("16:9 Wide") before recording. _page 72
•The AV cable is not connected properly. Make sure that the AV cable is connected to the proper jack, i.e. to the input iack of the device used for dubbing images from your camcorder. _page 88
English _109
