• Do not use the DVD camcorder near strong radio waves or magnetism:
If the DVD camcorder is used near strong radio waves or magnetism, such as near a radio transmitter or
electric appliances, noise could enter video and audio that are being recorded. During playback of normally
recorded video and audio, noise may also be present in picture and sound. At worst, the DVD camcorder could
malfunction.
° Do not expose the DVD camcorder to soot or steam:
Thick soot or steam could damage the DVD camcorder case or cause a malfunction.
° Do not use the DVD camcorder near corrosive gas:
tf the DVD camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel
engines, or corrosive gas such as hydrogen sulphide, the external or internal terminals could corrode, disabling
normal operation, or the battery connecting terminals could corrode, so that power will not turn on.
° Do not expose the DVD camcorder to insecticide:
Insecticide entering the DVD camcorder could dirty the lens in the laser pickup block, and in such a case the DVD
camcorder might not operate normally. Turn the DVD camcorder off and cover it with vinyl sheet, etc. before using
insecticide.
• Do not use a 3 !/2 inch(8cm) CD lens cleaner:
- Cleaning the lens is not necessary when using this DVD camcorder in the usual way.
- Using a 3 1/2 inch(8cm) CD tens cleaner could cause this DVD camcorder to malfunction.
°Do not touch the lens in the laser pickup block,
If you touch the lens in the laser pickup biock directly it may cause a malfunction. The laser pickup block is not
warranted for damage caused by misuse. Therefore, pay much attention when operating this camcorder.
• Do not wipe the DVD camcorder body with benzene or a thinner:
The coating of exterior could peel off or the case surface could deteriorate.
•Keep the memory card out of reach of children to prevent swallowing.
English jd