TAKING PHOTO IMAGES
OSet the Storage mode switch to CARD before recording on a memory card,
oYou can take photo images using the remote control. _*page 13
1.Slide the POWER switch downwards to turn the DVD camcorder on. o Set the Storage mode switch to CARD, _page 30
2.Check the subject on the LCD screen. (Lens and LCD)
o Set the Lens open/close switch to open (0). _page 10
3.Press the PHOTO button to take the picture.
• A shutter sound is heard. The photo image is recorded with the "Photo capture"
message appeared.
oWhile saving the photo image on the memory cards, you cannot proceed with taking the next photo.
•You can use the zoom function while recording.
•The number of photo images that can be stored depends on the quality and size of
the image. _*page 55
-The photo image is taken only in the 4:3 aspect ratio on the memory card.
-Audio will not be recorded with the photo image on the memory card.
•Please check the protection tab setting on your memory card before recording.
You may not be able to record when it is locked,
. If focusing is difficult, use the manual focus function. _*page 70
•Do not operate the POWER switch or remove the memory card while accessing the storage media, tt may damage the storage media or data.
. Photo images are actually wider than what appears on the LCD screen.
•The recorded photo image size is 800X600.
English _57
