Samsung SC-DXIO3 manual Connect na to AV d ic, Connecting to a

connect na to AV d ic

You can view the recorded movie and photo images(SC-DXl03i DX105 only) on a large screen by connecting the DVD camcorder to a TV,

CONNECTING TO A "IV

oTo play back your recordings, the television must be NTSC compatible. _page 102

•We recommend that you use the AC power adaptor as the power source for the DVD camcorder.

Use the provided AV cable to connect the DVD camcorder to a TV as follows:

1.Connect the end of the AV cable with the single plug to the AV jack of the DVD camcorder.

2.Connect the other end with video (yellow) and left(white)/right(red) audio cables to the TV.

DVD eamcorder TV

@@@

Signal flow

AV cable

®• For more information about the connection, refer to your TV's user manual.

•Before connecting, make sure that the volume on TV is turned down: forgetting this may cause feedback from the TV speakers.

°Carefully connect the input and output cables to the corresponding connections on the device the DVD camcorder is being used with.

Viewing on "IV screen

1.Turn on the -D! and set the input selector to the Input connection the DVD camcorder is connected to.

-This is often referred to as "line." Refer to the TV instruction manual for how to switch the TV input.

2.Turn the DVD camcorder on.

-Slide the POWER switch downwards, then open the LCD screen.

-Set the appropriate storage media. (SC-DX103/DX105 only) _ page 30

-Press the MODE button to set the Play mode. _page 21

-The image from the DVD camcorder will appear on the TV screen.

3.Perform playback.

-You can perform playback, recording or make settings in the menu while viewing on your TV screen.

86_ English