Fujitsu BX600 manual Installing the JRE for Linux Clients, DKVM network configuration

Installing the JRE for Linux Clients Initial Browser Setup of the BX600

2 Installing the JRE for Linux Clients

Go to http://www.java.com/en/download/linux_manual.jsp

There are two types of installation packages:

•Linux RPM package

•Linux self extracting binary file.

To Install the JRE for Linux clients:

Download the package that best suits your needs. Follow the instructions outlined on the website.

To test that the JRE is installed, enabled and working properly on your computer, run the test applet from the following web site:

http://www.java.com/en/download/installed.jsp

3 DKVM network configuration

3.1 Default IP address

The Ethernet port on FSC-DRM is manually configurable from the (MMB) web pages. Configuration data is passed via the FSC BX600 chassis I2C bus.

The default IP address configuration is static. (DHCP is turned off by default)

•The default settings are:

•Hostname: FSCDigitalKVM

•IP address: 192.168.0.121

•Subnet mask: 255.255.255.0

•Gateway IP address: 192.168.0.1

The MMB default IP address is 192.168.0.120, but it is user configurable1.

To launch the KVM configuration web page:

To get to the MMB web page, point your browser to the IP address of the MMB.

Once you have access to the MMB web page, mouse click the dKVM Blade folder on the left of the page. The dKVM Blade folder expands

click the Network Configuration link to launch the KVM Configuration page.

1. The IP address of the MMB and the IP address of the dKVM must be of the same subnet.

2