34
Once started, the decalcifying program must not be inter-
rupted.
Always wait until the decalcifying agent has been used up
and the tank is empty. Never fill in additional descaling
agent.
COFFEE READY
DESCALE
Press the maintenance key (C).
TRAY / GROUNDS
EMPTY
Empty the drip tray (1) and the coffee grounds tray with the
container (3).
TRAY
MISSING
Place the empty, clean drip tray (1) and the coffee grounds tray
with the container (3) back into the IMPRESSA Z5.
SOLVENT IN TANK
PRESS BUTTON
Remove the water tank from the machine. Empty out any
remaining water.
Completely dissolve the content of one blister (3 tablets) in a
receptacle containing 0.6 litres of water, and pour the mixture into
the water tank. Place the water tank back into the machine.
SOLVENT IN TANK
PRESS BUTTON
Remove the cappuccino nozzle (4) from the machine (Fig. 14).
Place a receptacle each under the height-adjustable hot water
spout (12) and under the connecting parts of the nozzle (use tall
receptacle). Press the maintenance key (C).
MACHINE IS DECALCIFYING
You will hear an acoustic signal.
TRAY / GROUNDS
EMPTY
Empty the drip tray (1) and the coffee grounds tray with the con-
tainer (3).
TRAY
MISSING
Place the empty, clean drip tray (1) and the coffee grounds tray
with the container (3) back into the IMPRESSA.
WATER TANK
FILL
Thouroughly rinse out the water tank and fill it with fresh
cold tap water. Then place it back into the IMPRESSA.
PRESS BUTTON
Re-assemble the cappuccino nozzle.
Place a cup each under the height-adjustable hot water spout (12)
and the cappuccino nozzle (4), and press the maintenance key
(C).
MACHINE IS DECALCIFYING
UNIT IS HEATING
After the machine has heated up, it will automatically perform a
rinsing cycle.
RINSING