15. Programming
The IMPRESSA leaves the factory with a number of default settings that allow you to make coffee without having to pro- gram the machine first. You can, however, adjust various parameters to make the coffee suit your personal taste.
The following parameters can be programmed:
Filter
Water hardness
Maintenance
Temperature
Coffee strength
Cappuccino
Milk
Save energy
Time
Automatic
Automatic
Information
Rename
Language
Display
15.1 Programming the filter
Please refer to Chapter 5 “Using the CLARIS plus filter cartridge”.
15.2Programming your machine to the correct water hardness (only with FILTER NO)
Please refer to Chapter 4 “Adjusting your machine to the water hardness”.
15.3 Maintenance
You can activate the following maintenance functions from this program item:
RINSING MACHINE, CLEAN CAPPUCCINO,
CHANGE FILTER, CLEAN UNIT, RINSE CAPPUCCINO, DECALCIFY MACHINE.
“DECALCIFY MACHINE” is not displayed if you are using a CLARIS plus filter and the filter is set to “Yes”.
“CHANGE FILTER” is not displayed if you are not using a CLARIS plus filter and the filter is set to “No”.
COFFEE READY
Press the Rotary Switch (B) until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (B) until the following message is dis- played:
MAINTENANCE
Press the Rotary Switch (B) to start programming.
RINSE UNIT
Turn the Rotary Switch (B) until the required maintenance func- tion (for selection see above) is displayed. Press the Rotary Switch (B) to activate the function.
15.4Programming the temperature for coffee, espresso, cappuccino and special coffee
You can adjust the temperature for each type of coffee sepa- rately. The temperature can be set to 3 different levels (LOW, NORMAL, HIGH).
20
