15
CAPPU RINSE
Place a sufficiently large receptacle (ca. 0.5 litres) under the cap-
puccino nozzle (4).
Turn the selector switch (1, Fig. 9) to the steam range (c, Fig. 9).
Press the maintenance key (C) to start the cappuccino rinsing
cycle.
CAPPUCCINO
RINSING
COFFEE READY
You can also trigger a cappuccino rinsing cycle manually
from the maintenance menu at any point in time (see Chapter
15.3).
9.3 Cappuccino cleaning cycle
We recommend running the cappuccino cleaning cycle daily
if you make cappuccino or frothed milk.
Your IMPRESSA will not prompt you to run the cappuccino
cleaning cycle. You need to activate the cappuccino cleaning
cycle manually from the maintenance menu.
Please contact your authorized dealer for a JURA cappuccino
cleaner that is suitable specifically for the cappuccino clean-
ing program of your IMPRESSA. Please note that the use of
unsuitable cleaning agents may cause damage to your
machine and could leave unfavourable residues in the water.
COFFEE READY
Press the Rotary Switch (B) until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (B) until the following message is dis-
played:
MAINTENANCE
Now press the Rotary Switch (B) to start the maintenance menu.
RINSE UNIT
Turn the Rotary Switch (B) until the following message is dis-
played:
CAPPUCCINO CLEANING
Place a sufficiently large receptacle (ca. 0.5 litres) under the cap-
puccino nozzle (4).
Confirm by pressing the Rotary Switch (B).
CLEANER FOR CAPPUCCINO
PRESS BUTTON
Fill a receptacle with approx. 250 ml of fresh water and add 1
capful of cappuccino cleaning agent. Dip the milk hose into the
solution (Fig.10).
Make sure the selector switch (1, Fig. 9) is not set to “Steam” (c,
Fig. 9).
Press the maintenance key (C) to start the cleaning cycle.
MACHINE IS CLEANING
WATER FOR CAPPUCCINO
PRESS BUTTON
Fill a receptacle with fresh water and dip the milk hose into it
(Fig. 10).
Press the maintenance key (C).
E