JVC 1004MKH-VT-VT manual Sound Menu, Tive at once

Note 1:
At low signal level, the changings on the Noise Reduction
function are not effective when there is menu on the screen.
If the menu is removed, the effect of this function is seen. At
normal broadcasting, Noise Reduction changings are effec-
tive at once.
Note 2:
At moving pictures, while Noise Reduction is at maximum
level, some picture distortions may occur. If Noise Reduc-
tion is set to medium or minimum, the picture will improve.
Setting Hue				Setting Bass Level
During Playback NTSC system, this will ap-				• Using “	“ or “ ” button select Bass Level.
pear in AV mode only when NTSC video source				• Press “ ” button to increase bass level.
is applied. Otherwise, HUE option is invisible
in Picture menu in TV mode :				• Press “	“	button to decrease bass level.
• Using “ “ or “	” button select Hue.			Setting Treble Level
• Press “ ” button to increase hue level.				• Using “	“ or “ ” button select Treble
• Press “ “ button to decrease hue level.				• Press “	” button to increase treble level.
Center value is indicated with one arrow.				• Press “	“	button to decrease treble level
Reset
				Setting Balance
Press BLUE button to reset the picture modes				It allows adjusting the distribution between the
to factory default settings.
				left and right speakers.
To Store the Settings
				• Using “	“ or “		” button select Balance.
In the Picture Menu, all settings are stored				• Press “ ” button to change balance right-
automatically.
				ward.
Sound Menu
				• Press “ “ button to change balance leftward.
To change sound settings
				Hyper Sound
As you enter the main menu, sound will be				• Using “	“ or “ ” button select Hyper Sound
the second item. In the main menu, select
Sound using “	“ or “ ”	button, then enter		• Pressing “		“ or “	” button will turn on or off
the sound menu pressing “		“ / “ ” or “OK”		this feature.
				Pseudo/spatial effect can be turned on or off
button.
Setting Volume:				via the Hyper Sound item in the Sound menu
				or by remote control. In Mono transmission
As you enter the sound menu, Volume will be
				the left and right channels will be added at left
the first selected option.				channel and dummy stereo effect will intro-
• Press “ ” button to increase volume.				duced to end-user.
				In stereo transmission it yields a phase differ-
• Press “ “ button to decrease volume.
				ence between left and right channels. Hyper
Or you can directly change the volume set-				Sound selection will be displayed on the
tings using “	+” (to increase) or “-		” (to	screen when the TV Status button is pressed
decrease) button.				or programme is changed.
				To Change Audio Out Settings
				Audio Out is a sub-menu of Sound menu.
			- 16 -