Manuals / Brands / Photography / Camcorder / JVC / Photography / Camcorder

JVC 1208YDR-YG-MD OFF, AUTO, INFO, INFO, INFO, ! mode, # mode, Zooming, Zoom in, PLAY/REC, Zoom out, PLAY/REC, PLAY/REC, LED Light, (Continued), Preparation:, Preparation:

1 74

Download 74 pages, 5.61 Mb

Recording Files (Continued)

Zooming

Preparation:

•Slide the mode switch to select ! or # mode.

•Press the PLAY/REC button to select recording mode.

Zoom out							Zoom in




W: Wide angle							T: Telephoto

You can also zoom out/zoom in by selecting

[W]or [T] on the LCD monitor (On-screen zoom control)

Zoom Ratio (Factory-preset)

! mode	# mode
[80X/DIGITAL]	[35X/OPTICAL]

LTo change the maximum zoom ratio (for ! mode only)

Change the settings in [ZOOM]. (Z pg. 59)

NOTE

Macro shooting is possible as close as approx. 5 cm (2”) to the subject when the zoom lever is set all the way to W.

LED Light

Preparation:

•Slide the mode switch to select ! or # mode.

•Press the PLAY/REC button to select recording mode.

1 Touch MENU.2 Select [LIGHT].3 Select the desired setting.

ON The LED light remains on regardless of the surrounding conditions.

The LED light turns on automatically AUTO when shooting in insufficient light

conditions.

24OFF Deactivates this function

Checking the Remaining Battery Power

Preparation:

•Attach the battery pack.

•Press the PLAY/REC button to select recording mode.

For ! mode:

Press the INFO button three times or INFO and then select ;.

For # mode: Press INFO.

DIRECT
DVD	BATTERY CONDITION
	100%
		MAX TIME
	50%	min
	50%
INFO
	0%
		QUIT

LTo return to the normal screen Select [QUIT] or press INFO.

NOTE

The recordable time display should only be used as a guide. It is displayed in 10 minute units.

Contents

LYT2019-002A-M Dear Customer CAUTION NOTES: •The serial number plate is on the battery pack mount For USA-CaliforniaOnly – special handling may apply CAUTION CAUTION: The mains plug shall remain readily operable WARNING: IMPORTANT SAFETY INSTRUCTIONS 1.Read these instructions 2.Keep these instructions 3.Heed all warnings 4.Follow all instructions Blinks: Accessing files Do not remove the AC adapter, the battery pack or the SD card when the lamp is blinking Battery Pack The battery pack is not charged at the time of purchase Slide your finger up and down on the sensor. Then touch OK The mode changes The auto recording when you press the indicator appears button QSelect playback mode R Select the desired file S Select F(Touch OK) LTo perform operations such as forward search or reverse search (Z pg. 26) LTo view files on TV (Z pg. 33) JVC SOFTWARE LICENCE AGREEMENT IMPORTANT 1 COPYRIGHT; OWNERSHIP 2 GRANT OF LICENCE (1) 6 TERM 7 EXPORT CONTROL 8 U.S. GOVERNMENT USER 9GENERAL Victor Company of Japan, Limited Make a backup of important recorded data Make a trial recording Reset the camcorder if it does not operate correctly Precautions on handling batteries www.jvc.com GETTING STARTED Accessories Preparing the Remote Control Index Indications on LCD Monitor COPYING Copying Files After the menu is displayed on the LCD monitor: Using with a Portable Media Player AC Adapter Remote Control Cable USB Cable CD-ROM Page Camcorder MENU ( EXPORT Button UPLOAD DIRECT DVD During both Video and Still Image During Video Recording Only Recording !Selected Operation Mode Indicator (Z pg. 30) During Video Playback During Still Image Playback Charging the Battery Pack 1 Close the LCD monitor to turn off the camcorder 2 Attach the battery pack, then connect the AC adapter LTo check the remaining battery power See page LRequired charging/recording time (approx.) [ON]: Clock is advanced one hour from the normal time which you set [OFF]: Deactivates the function Select the item by using the touch sensor and select [}] to set To reset the setting, select [QUIT] Language Setting The language on the display can be changed 4 Select [LANGUAGE] 5 Select the desired language LTo quit the screen Select [QUIT] Using an SD Card QInsert an SD card Preparation: Press Power (1) button to turn off the camcorder 1 Open the SD card cover RECORDING/PLAYBACK Video Recording !(video) mode Press the PLAY/REC button to select recording mode Press the START/STOP button to start recording Still Image Recording #(still image) mode Press and hold the SNAPSHOT button halfway LTo view the last recorded image Select A after shooting after shooting (Continued) Zooming Zoom out Zoom in ! mode Checking the Remaining Space on the recording medium •Slide the mode switch to select ! mode Press the INFO button once (BUILT-INMEMORY) or twice (SD CARD) The maximum recording time is displayed for each video quality mode 1)Select the video quality Video Playback Press PLAY/REC to select the playback mode Select the desired file To play back a few seconds from each select scene of the recorded videos LOperations during Video Playback On-screenbuttons Still Image Playback Slide the mode switch to select # (still image) mode LTo delete a still image Select $ LTo change the number of thumbnails (6 thumbnails/20 thumbnails) LOperations during Still Image Playback On-screenbuttons The number of files in the group is displayed in the thumbnails Event Screen 2 Select the [SEARCH EVENT] 4 Select the recording date To display all the files, select [ALL] Change to Manual Recording Mode Select [A/M] twice To return to the auto recording mode so that the indicator appears Adjusts the exposure and shutter speed to suit your surroundings or the subject @[AUTO]: White balance is adjusted automatically B MWB: Adjusts the white balance manually depending on the light source the screen Keep touching the OK button until the B indicator starts blinking then stops Connection with TV LTo connect using the AV connector Playback Operation After the connection with TV is completed 1 Turn on the camcorder and the TV EDITING/PRINTING Capture a Still Image from a Video Press SNAPSHOT when playback is paused •The continuous shooting function cannot be used to capture images •You cannot capture video during playback Deleting Selected Files After performing steps 1-2 (Z pg. 34) 3 Select [FILE SELECT] 4 Select the desired file and select $ •The * mark appears on the file. To select other files, repeat this step Protecting Files 2 Select [EDIT] 3 Select [PROTECT/CANCEL] Protecting the Currently Displayed File 4 Select [CURRENT] Protecting All Files After performing steps 1-3 (Z pg. 36) 4 Select [PROTECT ALL] Press the INFO button LTo release protection of all files Changing the Event Registration 3 Select [CHANGE EVENT REG.] Changing the Event of the Currently Displayed File 5 Select the file you want to register 6 Select a new event Trimming Files 3 Select [TRIMMING] 4 Select the desired file 5 Select [SET] at the start point 6 Select [SET] at the end point Creating Playlists�� 2 Select [EDIT PLAYLIST] 3 Select [NEW LIST] 4 Select an item and display files •[CREATE FROM SCENE]: Display all files individually Playing Back Playlists 2 Select [PLAYBACK PLAYLIST] 3 Select the playlist LTo stop playback Select L LTo play back from the desired scene COPYING Types of Copying and Connectable Device DVD Burner (CU-VD3/VD50) Copying/Moving Files You can copy or move files between built-inmemory and SD card 5 Select the desired menu [COPY ALL]/[MOVE ALL]: Select this to transfer all files in the recording medium •[SELECT AND COPY]/[SELECT AND MOVE]: Select when you want to transfer the selected files Backup All Files •Connect the camcorder to the DVD burner 1 Select [CREATE FROM ALL] 2 Select the desired menu •[ALL SCENES]: Selecting Files for Backup 1 Select [SELECT AND CREATE] •[CREATE BY PLAYLIST]: 1)Select the desired list 3)Select [SAVE] LTo play back the created disc using the camcorder 1)Connect the camcorder to the DVD burner 2)Turn on the camcorder first, than turn on the DVD burner 3)Select [PLAYBACK] 4)Select the desired folder Creating a DVD using a PC QInstalling the software to the PC System Requirements Windows Vista OS: Windows Vista® Home Basic (SP1) Home Premium (SP1) (32-bit, pre-installed) RMaking Backup on the PC 3 Click [All volume in camcorder] and click [Next] 4 Click [Start] 2 Select [BACK UP] LTo disconnect the camcorder from the SMaking User Lists to Arrange the Files Make backup on the PC 1 Double-clickicon and open the calendar 2 Select [Movies only] 3 Click [+] TCopying Files to a DVD 1 Select the user list and click [Create Disc] 2 Click [Select files individually] and click [Next] 3 Drag the file, and drop into the part at the bottom and click [Next] 4 Input the disc name, select the top menu style and click [Next] Folder Structure and Extensions Customer Support Information JVC Pixela Dubbing Files to a VCR/DVD Recorder LTo connect using the AV connectors (analog dubbing) 2 Set the VCR/DVD recorder to its AUX input mode 3 Play back playlists on the camcorder LTo stop dubbing Turning on the Export Mode Press EXPORT twice LTo turn off the export mode Press EXPORT twice Changing the Export Setting 1 Press EXPORT Transferring the Files to PC Install iTunes® on a PC http://www.apple.com/itunes 1 Connect the camcorder to the PC with the USB cable 2 Select [EXPORT TO LIBRARY] Turning on the Upload Mode Upload Trimming •Press the PLAY/REC button to select recording mode Press UPLOAD twice The upload mode turns off each time recording is finished 6 Select [CAPTURE TRIMMED FILE] Uploading Files 2 Select [UPLOAD] LCannot upload the file to YouTube™ MENU SETTINGS Select the desired menu Select the desired setting Mode MANUAL SETTING 35X/OPTICAL / 40X/DYNAMIC* / [80X DIGITAL] / 800X/DIGITAL @ ZOOM�� OFF: Deactivates the function [ON]: Activates the function l ON-SCREENDISPLAY Select [ON-SCREENDISPLAY] on Video Playback or Image Playback Mode OFF / [DISPLAY ALL] / DISPLAY DATE ONLY DISPLAY DATE 5 SEC RECORD BUTTON & QUICK RESTART [ON]: If the LCD monitor is opened again within minutes, the camcorder starts quickly. The power consumption used for the 5 minute period after the VIDEO OUTPUT 4:3 / [16:9] MEDIA SETTINGS Select [MEDIA SETTINGS], then select sub-menus REC MEDIA FOR VIDEO FURTHER INFORMATION Refer also to the FAQ of new products on JVC’s website The following phenomena are not malfunctions •The camcorder heats up when it is used for a long time •The battery heats up during charging Recording Playback Recording cannot be performed Recording stops by Problems Other The camcorder operates slowly when switching between video mode and still Indication SET DATE/TIME COMMUNICATING ERROR NOT FORMATTED FORMAT ERROR VIDEO MANAGEMENT FILE IS DAMAGED, RECOVERY IS REQUIRED TO RECORD PLAYBACK, RECOVER UNSUPPORTED FILE LTo clean the exterior LTo clean the LCD monitor Wipe gently with a soft cloth. Be careful not to damage the monitor LTo clean the lens Wipe gently with lens cleaning paper LFor general Power supply Power consumption Approx. 1.8 W When the LED light is off and the monitor backlight is set to [STANDARD] mode Rated Current Consumption: Dimensions (W x H x D) Power supply DC 3 Battery life Approx. 1 year (depending on the frequency of use) When using the AC adapter in areas other than the USA USING HOUSEHOLD AC PLUG ADAPTER Plug Adapter Battery Packs The supplied battery Cautions (Continued) Main Unit • For safety, DO NOT ... open the camcorder’s chassis ... disassemble or modify the unit Page 18 33 21,62,66 13 26